Main Page Sitemap

Fif-232c null modem frg-100


fif-232c null modem frg-100

Yaesu uses two types of connectors.
It cannot send data to the hypnosis without trance pdf computer, and you cannot even set the mode by computer.
Rating: 4 /5 mikeee, quality of Product (5/5 helpful?
Supported rigs include IC-271, IC-471, IC-706, IC-725, IC-726, IC-728, IC-735, IC-736, IC-746, IC-751, IC-756, IC-761, IC-764, IC-765, IC775, IC781, IC-970, IC-R71, IC-R72, IC-R700, IC-R7000, IC-R7100, IC-R9000.These boards are a plug-and-play replacement for the Kenwood units.DON'T forget DON'T forget DON'T forget Connects serial devices, such as radios, rotor interfaces, TNCs, and serial-port keyers etc.Order the, or one of our.TS-711, TS-811, iF-10A board, tS-940, iF-10B board.
Works with all rigs that list the IF-232c as an option, including TS-50, TS-140, TS-440, TS-450, TS-680, TS-690, TS-711, TS-811, TS-850, TS-940, TS-950, R5000.
Yaesu yaesu yaesu yaesu FT-736, FT-747, FT-767, FT-980, FT-990, FT-1000/1000D, Heathkit SB-1400, FRG-9600, and others with DIN-6 CAT port.
It replaces Kenwood's IF-232C, Icom's CT-17, and Yaesu's FIF-232.Buy the (Straight thru, 9-pin male one end, 9-pin female on the other).If you want to make your own, we have been informed that a 9-pin RS232 cable with pins 2, 3, 5, 7, and 8 connected straight-thru is needed with this rig.It will now automatically log band, mode, and frequency directly from your radio.Buy the or for Yaesu miniDIN-8 radios.TS-440 R-5000 need the installed in the radio.However It was the wrong end for my Printer cutter.FT-757gxii (not FT-757GX FT-840, FT-890, FT-900, and others with miniDIN-6 CAT port.Buy the terminated with a male 6-din plug.You may use our LCU-3 interface if you wish to take advantage of the CI-V technology which allows you to run several rigs on the same serial port.IC-471, IC-475, IC-703, IC-706, IC-718, IC-725, IC-726, IC-728, IC-735, IC-736, IC-738, IC-746, IC-756, IC-761, IC-765, IC-775, IC-781, IC-970, IC-7000, IC-7200, IC-7700, IC-R10, IC-R71, IC-R72, IC-R700, IC-R7000, IC-R7100, IC-R9000, and other rigs that list an Icom CT-17 as an option.FT-100, FT-817, FT-857, FT-897 and others with a miniDIN-8 CAT port.The TS-50 requires an IF-10D interface, which we do not have, and for which we cannot find a source.


Sitemap