Main Page Sitemap

Pci express gpio device driver user guide

pci express gpio device driver user guide

As shown in Figure 11, the same operations are performed using the viGetAttribute and viOut32 functions in a text-based language.
In Labview, to close a session to a visa resource that you have opened the only function you need to call is visa Close.
This value must then be checked to determine the status of bit 31 (highest order bit in the register).
In this VI, the Low-Level-Register-Access operation visa Poke writes a 16-bit value to a register.Once you've plugged in your device and Windows has installed the default driver, open the Device Manager from the Control Panel.Using LabWindows/CVI to Install Your Device.INF Files To run your PXI application on a target machine, you must include the.INF files generated in your PXI application installer or you must install these files manually.PXI-6070E Example - 6070E This manual excelsior mercury model 5x8 VI opens a visa session to a PXI-6070E by calling visa Open in Labview.Supports built in flow control, supports Message TLP (Error) generation, supports integrated time out handling of Non-posted request. Again, this information is provided for example purposes only; it is not useful if attempting to handle interrupts for the PXI-6070E.PXI)?* to tell the visa driver to return only PXI device resources.
The function invoked if a particular event occurs is called a callback function.
The callback mechanism is useful when your application requires an immediate response.
This input would be supplied if our "6070E " was used in sequence as a subVI with other subVIs that may need to pass in an error.An IC interface is provided to configure MCS9922 device options through an external eeprom.The text-based example is slightly different because the pointer returned from viMapAddress must be passed to each viPoke16 function.This information is device dependent, but can be queried through the visa attributes its in the crack picture The values for these attributes are none (0 memory mapped (1 or I/O (2).I have encountered several issue until now, one of them being one of the PINs used by the PCI (power-on) was claimed by "SD2" and I had to change the DTS file to disable this "SD2".